Japanese version of the classic handlebar used on English 3-speeds.
These have a longer straight section (140 mm), making them more compatible with modern brake levers and grips. The standard 1" diameter clamp area is compatible with most stems, and is heavily knurled to prevent slippage.
Reach is 50 mm, Drop is -85 mm, the ends of the bars are 125 mm behind the center of the stem. 70 degree grip area, 50cm width (center-to-center.)
Will NOT accept bar-end shifters.
7/8" (22.2 mm) diameter takes "mountain bike" brake and shift controls.
Note: Some Nottingham Raleighs ( 1950s - 1960s) have a 15/16" handlebar clamp diameter. If you're replacing the handlebar on one, you should really replace the stem too, because it is unsafe to overspread the 15/16" stem to fit a standard 1" (25.4 mm) handlebar.
|Manufacturer's Part Number|