Heavy duty coaxial wire for taillights. Coax is the most durable and attractive wire for this purpose. This is the same wire used as original wiring on Schmidt headlights.
Available in two versions:
The first photo shows the coax for Schmidt headlights. A circular ground connector and a 2.8mm female spade connector are installed on one end. This is the combination required for use with older Schmidt halogen Lumotec, Schmidt E6, Edelux/Edelux II headlights, which ground through the base. The lollipop ground connector gets installed on the mounting bolt at the base of the lamp. The power lead attaches to the connector in the base.
Included are two loose 2.8mm female spade connectors for taillights. Many of the B&M taillights can be connected with bare wire, so they may not be necessary.
The second photo shows the one for B&M headlights. It has two 2.8mm female spade connectors installed at one end. Also included are two loose 2.8mm female spade connectors for taillights if needed.
3mm O.D. x 190cm long.
|Schmidt (Ground + 2.8mm female spade) / bare taillight ends||LT204|
|B&M (two 2.8mm female spade) / bare taillight ends||LT2042|