Searching...
 
 
 
 
 

Refine By

Brands

+ more brands

Price

–   GO

Size

Didn't Find It In Our Catalog?

VisaMasterCardAmerican ExpressDiscoverPayPal
 

Parts

79 Results
Per Page 30 60
1 2 3 Next
Brooks Saddle Cover - Black
$9.95 - $11.95

Now available in medium or large Protects your Brooks saddle from the elements. Secures with drawstring. Made of rubberized nylon. Medium: Fits B17, Team Pro, Swift. Large: Fits B66, B67, B72. [more]

SRAM PowerLink 9-Speed Master Link
$4.95

"Power Link" re-usable master link for 9-speed chains These re-usable master links allow you to open and close your chain for cleaning without damaging any links. [more]

Generic 9.5 mm Crank Cotter Pin (English Size) Each
$2.95

9.5 mm (3/8") Crank Cotters, English/Raleigh size, also fits Asian Bikes. For installation instructions, see our Cottered Cranks Article It is normal to have to do some filing on the flat for a good fit. Sold individually, but it is generally a good idea to replace both at once.… [more]

Wald 13/16" Seatpost
$9.95

Many older U.S. made bikes take this thin size. Unfortunately, there's very little choice in this diameter. This Wald galvanized steel seatpost is plenty long, but if fully extended, a heavier rider may well cause it to bend. [more]

Velox Velox Handlebar Plugs Black -Pair
$7.95

Reusable, screw-in type plugs. Made of rubber. [more]

Tressostar Tressoplast cloth bar tape- 1 Roll
$4.95

Made in France, this is the real thing. You'll need 2 (two) rolls to cover 1 handlebar. One roll does each side. [more]

Sunlite Schwinn-type grips
$8.95

These soft krayton rubber grips are very similar to those used for many years on classic Schwinns. Available in black and white. [more]

Sturmey-Archer Axle Key
$4.95

This is a commonly replaced part, the sliding key that the indicator spindle screws into. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Clutch (cross)
$7.95

This is a commonly replaced part. The 4 ends can get worn round where they drive the pinion pins in high gear, causing slippage. If this happens, you probably need new pinion pins too. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Clutch Spring
$4.95

This is the coil spring that fits over the axle to make the hub shift to higher gears. The little cap that is sometimes found on one end of this spring is not needed. Click here for a parts diagram of the Sturmey-Archer AW… [more]

Sturmey-Archer Fulcrum Sleeve
$4.95

Fulcrum Sleeve Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Indicator Spindle (Chain)
$7.95

Indicator Spindle (chain) - MK1 model This is the part with the little chain that comes out the end of the axle. This is a frequently replaced, easily damaged part. The MK1 works with almost all Sturmey-Archer hubs. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Lubricator (Oil cap)
$6.95

Use the point of a pencil to screw it in! Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Thrust Ring
$4.95

This is the part the clutch spring presses against. The axle key fits into a pair of notches in this part. Very old Sturmey-Archer hubs had a two-piece assembly for this, but the one-piece version can replace that. Click here for a parts diagram of the Sturmey-Archer AW… [more]

SRAM PowerLink 8/7 Speed Master Link
$4.95

"Power Link" re-usable master link for 7- & 8-speed chains These re-usable master links allow you to open and close your chain for cleaning without damaging any links. [more]

Origin8 Track Cog Lock Ring
$9.95

Left-hand threaded. To hold a track cog onto a track hub. Hardened threading and extra material make this highly durable to help you go the distance. ISO/English standard size 1.29" x 24 TPI fits most U.S., English, and Asian fixed gear hubs. [more]

Odyssey Odyssey Cable Knarps
$5.95

These bolt-on cable ends can solve a number of problems. They're primarily intended to fit into upright-handlebar brake levers. We mainly feature them for replacement of old-style Raleigh double-ended brake cables. Sold in pairs, with Allen wrench shown included. [more]

KMC Half Link 1/8"
$3.95

If you are having trouble fitting the desired gears onto a bike with vertical dropouts, this link will let you add or subtract 1/2 a link (1/2 inch) from your chain, allowing you to move the axle 1/4" forward or backward. Different brands of chain have different diameter rivets; these links do not… [more]

KMC Half Link 3/32"
$3.95

If you are having trouble fitting the desired gears onto a bike with vertical dropouts, this link will let you add or subtract 1/2 a link (1/2 inch) from your chain, allowing you to move the axle 1/4" forward or backward. This 3/32" half link fits narrow "road" type chains. [more]

Jagwire Huret Type Inner Shift Cable
$3.95

These double ended cables have a unique disc style head that fits Simplex/Huret and a normal Shimano/SRAM head. The Huret "disc" end will also work with vintage Suntour X-Press MTB shifters. [more]

Jagwire Teflon lined Brake Housing
$7.50 - $26.95

Quality 5 mm Teflon lined brake cable housing. In Black, Blue, Red, White, Yellow and Gray. Available in three lengths: 5 Foot Length $7.50 10 Foot Length $15.00 25 Foot Roll $26.95 [more]

Jagwire Teflon lined Shift Housing (4 mm)
$8.75 - $29.95

Quality 4 mm Teflon lined shift cable housing. In Black, Blue, Red, White, Yellow and Gray. Available in three lengths: 5 Foot Length $8.75 10 Foot Length $17.50 25 Foot Roll $29.95 [more]

Generic 9.0 mm Crank Cotter Pin (French Size) Each
$3.50

For installation instructions, see our Cottered Cranks Article It is normal to have to do some filing on the flat for a good fit. Sold individually, but it is generally a good idea to replace both at once. [more]

Fibrax Raincheater Vintage Brake Pads f/Steel Rims
$9.95

Made in the UK. These vintage style pads are the best performing for old Three-Speed and Ten-Speed bikes with side-pull or center-pull brake calipers. Threaded stud. 36mm Wide Blocks [more]

DT Swiss Competition Double Butted 2.0-1.8 (Silver)
$1.20

Standard 12mm nickel-plated brass nipples are included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the thinner… [more]

DT Swiss Competition Double Butted 2.0-1.8 - (Black)
$1.69

12mm black brass nipples included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the thinner middle section gives the… [more]

Brooks Proofide Leather Dressing 25g
$9.95

Proofide is the official Brooks leather dressing for longest life of your Brooks saddle. 25 gram tin [more]

Action 3 Speed/Touring-Type Handlebar Grips (Pair) Black
$7.95

These rubber grips are not as soft as the VAR (no longer available) grips, but they're a lot nicer than those cheap "plastic" grips. [more]

79 Results
Per Page 30 60
1 2 3 Next
 
Harris Cyclery |::| 1353 Washington St., Newton, MA 02465 |::| 617-244-1040
   Giant Bicycles Brompton Folding Bikes Surly
     Electra Bikes Rivendell Pashley
Bobbin Bicycles Raleigh All City