Searching...
 
 
 
 
 

Refine By

Brands

Size

+ more sizes

Didn't Find It In Our Catalog?

VisaMasterCardAmerican ExpressDiscoverPayPal
 
> Harris Cyclery Catalog > Parts > Hub Parts

Hub Parts

29 Results
Shimano Sprocket For Internal Gear & Coaster Brake Hubs
$14.95

Fits Sturmey-Archer and SRAM/Sachs/Torpedo hubs too. 3/32" width works with either wide or narrow chain. For illustration, see our Sturmey-Archer Parts Page For gearing help, see our Online Gear Chart for Internal Gear Hubs… [more]

Sturmey-Archer Cone with dust cap
$11.95

Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Fulcrum Sleeve
$4.95

Fulcrum Sleeve Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Lubricator (Oil cap)
$6.95

Use the point of a pencil to screw it in! Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Clutch Spring
$4.95

This is the coil spring that fits over the axle to make the hub shift to higher gears. The little cap that is sometimes found on one end of this spring is not needed. Click here for a parts diagram of the Sturmey-Archer AW… [more]

Sturmey-Archer Indicator Spindle (Chain)
$7.95

Indicator Spindle (chain) - MK1 model This is the part with the little chain that comes out the end of the axle. This is a frequently replaced, easily damaged part. The MK1 works with almost all Sturmey-Archer hubs. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Thrust Ring
$4.95

This is the part the clutch spring presses against. The axle key fits into a pair of notches in this part. Very old Sturmey-Archer hubs had a two-piece assembly for this, but the one-piece version can replace that. Click here for a parts diagram of the Sturmey-Archer AW… [more]

Sturmey-Archer Axle Key
$4.95

This is a commonly replaced part, the sliding key that the indicator spindle screws into. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Clutch (cross)
$7.95

This is a commonly replaced part. The 4 ends can get worn round where they drive the pinion pins in high gear, causing slippage. If this happens, you probably need new pinion pins too. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Axle Washer w/9.5 mm tabs HMW494
$6.95

These essential washer incorporate serrations to keep the axle from slipping forward, and also features tabs that keep the axle from rotating in the frame due to pedaling torque. If you're using a Sturmey-Archer hub on a newer frame made for a wider axle, you need the HMW494 with 9.5 mm tabs… [more]

E.A.I. Track Axle Set - Campagnolo Type
$89.95

These made-in-USA axle sets include cones, locknuts and very nice track nuts. These fit most Campagnolo road (freewheel) and track hubs. The quality is very high. [more]

Sturmey-Archer Pawl Pin (Sold in Pairs)
$6.95

AW hub uses 2 pairs of these. Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Axle 6 1/4 inch with sun pinion
$20.95

OUT OF STOCK - NO ETA Axle, 6 1/4 inch with sun pinion Sturmey-Archer AW hubs. [more]

Sturmey-Archer Low Gear Pawl (Left side) Pair!
$5.95

These are the pawls that fit in the planet cage, and drive the hub when low gear is selected. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Pawl Spring (sold in pairs)
$6.95

Pawl Spring. Each hub uses 2 pair of these. Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Axle Washer w/7.9 mm tabs
$5.95

These essential washer incorporate serrations to keep the axle from slipping forward, and also features tabs that keep the axle from rotating in the frame due to pedaling torque. The HMW155 with 7.9 mm tabs fits the narrow axle slots of bikes originally intended for Sturmey-Archer hubs. If you're… [more]

Sturmey-Archer Axle 5 3/4 inch with sun pinion
$16.95

Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Ball Retainer 7 x 1/4"
$7.95

Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Gear Ring Pawl (Right side) Sold as Pair
$9.95

Sold each. Two are needed. Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Planet Pinion (gear) set of 4
$8.95

Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Axle Cone Lock Nut
$4.95

3mm thick. Unique thread size, nothing else fits. Shown with left axle nut for comparison Click here for a parts diagram of the Sturmey-Archer AW… [more]

Sturmey-Archer Axle Nut Left (plain)
$5.95

Unique thread size, nothing else fits. Shown with right axle nut for comparison Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Axle Nut Right (with chain guide) HMN129
$7.95

Unique thread size, nothing else fits. Shown with left (plain) nut for comparison Click here for a parts diagram of the Sturmey-Archer AW hub. [more]

Sturmey-Archer Sprocket Circlip (snap ring)
$3.95

Use a thin screwdriver to install/remove this. After installation, use a hammer and punch to ensure that it is properly seated. Click here for a parts diagram of the Sturmey-Archer AW hub.… [more]

Sturmey-Archer Sprocket Spacer 1.7 mm - 1/16"
$3.95

Two of these go onto the driver along with the sprocket and the sprocket dust cap. The spacers may be re-arranged to allow you to fine-tune the chain line. These spacers are also sometimes used under the fixed cup of a bottom bracket, or under a thread-on freewheel or track sprocket, to correct… [more]

Sturmey-Archer Cone Lock Washer (right side)
$4.95

This essential washer incorporates two tabs that secure the wench flats of the right side cone, so that it will stay in adjustment. The right cone adjustment is quite critical. With the left cone slack, the right one should be tightened finger tight, then backed off 1/2 turn, plus as much more as… [more]

Velo-Orange QR Axle Skewers Front & Rear Set
$19.00

A reasonably light, well made set with internal cam. The acorn nut, the one without the lever, is alloy, but it has a chrome steel face pressed on for better grip and durability. It also has a nylon insert to prevent loosening. The other end also features an alloy housing, however the lever and cam… [more]

Sturmey-Archer Axle Washer 3.2 mm flat
$4.95

Axle spacing washer 3.2 mm (1/8 inch). [more]

Sturmey-Archer Pulley Assembly Seat Tube (standard) 1 1/8"
$10.95

Pulley Assembly Seat Tube (standard) 1 1/8" For illustration, see our Sturmey-Archer Parts Page [more]

29 Results
 
Harris Cyclery |::| 1353 Washington St., Newton, MA 02465 |::| 617-244-1040
   Giant Bicycles Brompton Folding Bikes Surly
     Electra Bikes Rivendell Pashley
Bobbin Bicycles Raleigh All City