TireSale FreeShipping Facebook Twitter HarrisCycleryBlog Instagram ShopOnline HolidayGiftGuide HarrisCyclery Default

 
 
 
 
 
 
 

Refine By

Categories

Brands

+ more brands

Consumer Reviews

Availability

Gender

Size

+ more sizes
VisaMasterCardAmerican ExpressDiscoverPayPal
 
> Harris Cyclery Catalog > Browse our Parts Catalog

Browse our Parts Catalog

856 Results
Per Page 30 60
1 2 3 4 5 Next >>
Various Manufacturers Stainless Socket Cap Screw 4 mm x 20 mm
$0.75

Use this as your B tension screw on Deore rear derailleur, enabling use of 11 (or 12t)-36t 10 speed cassette! [more]

DT Swiss Competition Double Butted 2.0-1.8 (Silver)
$1.20

Standard 12mm nickel-plated brass nipples are included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the… [more]

Dia Compe Radius Washer Set for Front Caliper Brakes
$1.50

Some fork crowns are curved. These washers give a snug fit for your fork mounted brake calipers. 6mm aluminum. One set. For the front, and back, of the fork. [more]

Dia Compe Radius Washer Set for Rear Caliper Brakes
$1.50

These washers give a snug fit for your rear brake caliper that is mounted to the seat stay bridge. 6mm aluminum. One set. For the front, and back, of the bridge. [more]

DT Swiss Competition Double Butted 2.0-1.8 - (Black)
$1.69

12mm black brass nipples included. The Double-Butted DT Competition is a great all-around spoke. These Swiss-made stainless steel spokes have three thicknesses: 2.0 (14 gauge) mm at the ends. 1.8 mm (15 gauge) in the middle. Not only does this save weight, but the thinner middle section… [more]

Sturmey-Archer Connector Cap for XFDD Dynahub
$1.95

Cap for wire connection. [more]

Dia Compe Transverse (Straddle) Cable Single-Ended 1.8 x 380mm
$2.95

For Cantilever Brakes The standard. Single ended. Allows mechanical leverage to be setup as needed. [more]

Product Rating
 
5.0 stars
 (1 Review)
Generic 9.5 mm Crank Cotter Pin (English Size) Each
$2.95

9.5 mm (3/8") Crank Cotters, English/Raleigh size, also fits Asian Bikes. For installation instructions, see our Cottered Cranks Article It is normal to have to do some filing on the flat for a good fit. Sold individually, but it… [more]

Shimano Fixing Ring for Cassette Joint for Nexus 8 Speed Hub
$2.95

The fixing ring locks the cassette joint onto the hub. It is not included with the cassette joint. [more]

Sturmey-Archer Pinion Pin - Sold EACH
$2.95

OUT OF STOCK - NO ETA Sold individually - 4 are needed. When the protruding ends of these get rounded off, the clutch can slip in high gear. For illustration, see our Sturmey-Archer Parts Page [more]

Wheels Mfg 3 mm Chainwheel spacers-set of 5
$2.95

3 mm chainwheel spacers (set of 5). For budget road-to-fixed conversions, a quick and dirty way to make the chainline work is by spacing the chainwheel inward from the crank spider.

This is especially useful if you're using a hub made for a multi-speed freewheel, because it reduces the amount of… [more]

Generic 9.0 mm Crank Cotter Pin (French Size) Each
$3.50

For installation instructions, see our Cottered Cranks Article It is normal to have to do some filing on the flat for a good fit. Sold individually, but it is generally a good idea to replace both at once. [more]

EJAC French Gear Shift Cable
$3.95

"Universal" French gear shift cable, fits Huret, Schwinn, Benelux These are traditional "universal" double-ended cables, standard cylindrical fitting on one end, disc fitting on the other. Cut off the end you do not need. These are not nearly as nice as the stainless "Slick" cables we sell,… [more]

Generic Transverse (Straddle) Cable 2-ended 110mm
$3.95

These short (110mm) straddle cables fit older center-pull road brakes (Weinmann & Dia-Compe) and some U-brakes. [more]

Jagwire Stainless Slick Brake Cable, Double-ended
$3.95

These are very high-quality rust-proof calbles. The cables are die-drawn to smooth out their surface for reduced friction. Double-ended fits Road or Mountain levers. 1700 mm length. [more]

KMC Half Link 1/8"
$3.95

If you are having trouble fitting the desired gears onto a bike with vertical dropouts, this link will let you add or subtract 1/2 a link (1/2 inch) from your chain, allowing you to move the axle 1/4" forward or backward. Different brands of chain have different diameter rivets; these links do not… [more]

KMC Half Link 3/32"
$3.95

If you are having trouble fitting the desired gears onto a bike with vertical dropouts, this link will let you add or subtract 1/2 a link (1/2 inch) from your chain, allowing you to move the axle 1/4" forward or backward. This 3/32" half link fits narrow "road" type chains. [more]

Sturmey-Archer Pawl Pin (Sold in Pairs)
$3.95

AW hub uses 2 pairs of these. [more]

Sturmey-Archer Sprocket Circlip (snap ring)
$3.95

Use a thin screwdriver to install/remove this. After installation, use a hammer and punch to ensure that it is properly seated. [more]

Sturmey-Archer Sprocket Spacer 1.7 mm - 1/16"
$3.95

Two of these go onto the driver along with the sprocket and the sprocket dust cap. The spacers may be re-arranged to allow you to fine-tune the chain line. These spacers are also sometimes used under the fixed cup of a bottom bracket, or under a thread-on freewheel or track sprocket, to correct… [more]

Various Manufacturers Mickey Cable Barrel Adjuster
$3.95

This unit is intended to fit into a top-tube cable stop and provides a fingertip adjustment for your rear brake. This is very desirable on drop-bar conversions of bicycles originally built for upright bars (upright-bar brake levers usually incorporate a barrel adjuster, while drop-bar levers do… [more]

Product Rating
 
5.0 stars
 (1 Review)
Various Manufacturers Rear Derailleur Adaptor Claw
$3.95

Adaptor claw

to attach a standard derailer to a rear dropout that does not have a built-in Derailleur mount. The bolt and its special shoulder nut fit in the back of the axle slot. When normally installed, the left end of the wheel's axle will wind up near the middle of its axle… [more]

Jagwire Stainless Slick Inner Shift Cable
$4.95

These are very high quality rust proof cables, Die drawn to smooth out their surface for reduced friction. Length: 2300mm Before you install cables, please check out our cable page [more]

SRAM PowerLink 8/7 Speed Master Link
$4.95

"Power Link" re-usable master link for 7- & 8-speed chains

These re-usable master links allow you to open and close your chain for cleaning without damaging any links. [more]

SRAM PowerLink 9-Speed Master Link
$4.95

"Power Link" re-usable master link for 9-speed chains

These re-usable master links allow you to open and close your chain for cleaning without damaging any links. [more]

SRAM PowerLink Gold Chain Connector 9-speed
$4.95

These are the correct connecting links for SRAM's PowerLink 9-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. [more]

Product Rating
 
3.0 stars
 (1 Review)
SRAM PowerLock Chain Connector 10-Speed
$4.95

These are the correct connecting links for SRAM's 10-speed chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in packs of four. [more]

Sturmey-Archer Axle Cone Lock Nut
$4.95

OUT OF STOCK - NO ETA 3mm thick. Unique thread size, nothing else fits. Shown with left axle nut for comparison [more]

Sturmey-Archer Axle Key
$4.95

This is a commonly replaced part, the sliding key that the indicator spindle screws into. [more]

Sturmey-Archer Axle Nut Left (plain)
$4.95

Unique thread size, nothing else fits. Shown with right axle nut for comparison [more]

856 Results
Per Page 30 60
1 2 3 4 5 Next >>
 
Harris Cyclery |::| 1353 Washington St., Newton, MA 02465 |::| 617-244-1040
   Giant Bicycles Brompton Folding Bikes Surly
     Electra Bikes Rivendell Pashley
Bobbin Bicycles Raleigh All City